Fuji Cast Resin Transformers
Electromechanical systems
TMEIC 3-phase medium voltage motor
TMEIC 3-phase low voltage motor
Medium Voltage Equipment TMEIC Japan
Standard Specifications
・Standard design
- ・Rated voltage; up to 36kV, Rated power; up to 24,000kVA
- ・Insulation system temperature; 155℃(F)
- ・Type of cooling; AN (Naturally-Cooled), AF (Forced-air-Cooled)
- ・Maximum ambient temperature; 40℃, yearly average temperature; 20℃
- ・Utilizing aluminum for winding and copper for terminal
- ・Climatic, environmental and fire behavior classes C2, E2 and F1.
・Optional design
- ・Insulation system temperature; 180℃(H)
- ・High & Super-high efficiency type
- ・Low noise type
- ・Maximum ambient temperature 50℃
- ・Rectifier transformer (provision for harmonics)
- ・In-rush current reduced design to standard value 15～20 times
- ・Winding temperature rise reduced design for higher ambient temperature site
Applications
・Transformer Applications Designs
Fuji Cast-Resin Transformer can be applied to power transformers, distribution tansformers, transformers for static converter (such as VSD : variable-speed drive ).
・High-Rise Building Applications Designs
Japan's largest capacity cast resign transformer at 17MVA, the units are installed on the 13th floor of a 41story building using the site-reassemble method. This technique allows for product installation in applications with size and weight restrictions.
Technical data
3-phase 60Hz 13MVA(AN)/17MVA(AF) 22.0/6.6kV
Insulation class H
Deployment of Cast Resin Transformers
2008 - 3 units deployed to a high-rise building the city of Osaka, Japan.
・Wind Turbine Applications Designs
Optimum design results in compact size and lightweight transformers
Features
Compact and light : Space saving with slip-on cable joint ⇒ Possible to install inside the shaft
High efficiency : 99.2% or more at rated power
Salt resistance : (*)ESDD 0.06mg/cm2
Vibration resistance : acceleration 0.5G (max.3G for TR body)
Able to withstand AC 77kV Separate-source test voltage for 2000m above sea level site
Technical data
3-phase 60Hz 2700kVA 0.69/34.5kV Insulation class H
Delivery Record
Approximately 500units delivered since 2007
・Railway Applications Designs
Features
Withstand cyclic load; excellent overload capability
Provision for harmonics of rectifier
; taking into account of the additional losses
Withstand 170kV Lightning impulse test voltage
refer to IEC60076-11
Technical data
3-phase 50Hz 2700kVA 33.0/2x0.59kV
Insulation class H
With protection enclosure IP21
Delivery Record
Approximately 170units delivered to the railway substations in the Middle East in 2009
Product Features
Vacuum-Casting
Our product is manufactured with vacuum casting method using a premium metal pattern, resulting in a thick resin layer with a smooth surface
Fire Resistant
Epoxy resin possesses self-extinguishing and fire resistant properties, making it safe in flammable environments
Fuji Electric's cast resin transformer successfully completed and passed all tests of IEC 60076-11 in 2006.
Partial Discharge Free
Void-less : Excellent partial discharge characteristics.
In order to maintain superior quality, Fuji Electric voluntarily adopted the following stricter standard:
All units are subjected to partial discharge test.
Voltage that is twice that of the operating system is applied to ensure safety
Partial discharge is less than 10 pC (Pico-coulombs intensity)
Cast resin transformers are also coated in high-vacuum chambers to reduce air and other gases in the resin that could produce partial earth discharges. In effect, they hermetically seal the transformer's core.
Shop Test Items
・Routine test
Measurement of insulation resistance
Measurement of winding resistance
Measurement of voltage ratio and phase displacement check
Measurement of short-circuit impedance and load loss
Measurement of no-load loss and current
Separate-source AC withstand voltage test
Induced AC withstand voltage test
Partial discharge measurement
・Type test (Optional)
Lightning impulse test
Temperature-rise test
Measurement of sound level
Applied standards
- ・IEC60076-11
- ・ANSI/IEEE C57.12.01
- ・GB6450, GB/T10228
- ・JEC-2200 etc.
