Anti-corrosion submersible pump:

The submersible pump does not cause clogging and is highly efficient:

The vortex pump D 3000 and D 8200 are designed as a free-form design that does not cause clogging, do not allow low efficiency and flow rates reach 100 l / s (1,600 gpm), and the engine is about 1.5 - 7.4 kW 2 to 6 hp.

The pump is designed for use in harsh conditions such as municipal wastewater and industrial wastewater.

High efficiency, lasting, maximum uptime and lowest cost.

N-vane pumps achieve flow rates up to 1,000 l / s (16.000 gpm) with motors from 1.3 to 310 kW (1.5 to 415 hp) and head up to 100m(300ft). The pump features innovative self-cleaning and this function is the smartest choice for many applications.

Flygt F-pump series Cut propeller pump.

Flygt with F-type paddlewheels up to 200 l / s (3200 gpm),
with motors from 1.7 to 47 kW (2 to 65 hp) and head up to 81m(260ft).The energy-efficient F-type pump is specially designed for hard application and continuously maintained hydraulic efficiency, sustainable in wastewater treatment applications, Sludge treatment, and agricultural applications.

Booster in the more application

Pump C stainless steel version reaches a capacity of up to 200l / s(3,200 gpm) with motors with capacities from 2.4 to 54 kW(3 to 72 hp). Pumps are commonly used for the drainage of highly corrosive industrial wastewater

Flygt C-pumps 3068-3800 C pump spiral groove paddle.

Flygt pump range with C-type reel with capacity up to 3000l / s(48000 gpm), motor up to 775kW(1050 hp). The standard of this product line is designed with cast iron for use in urban wastewater treatment fields, industrial zones. The product has an explosion proof version.

What is a booster pump?

The pump is used for the purpose of increasing the pressure of water circulating in the pipeline, making the water flowing out to the nozzles using more, more power. The commonly used booster pump is an automatic pump ... And when the user closes the tap in, the pump also automatically turns off.

What is a booster pump?

The pump is used for the purpose of increasing the pressure of water circulating in the pipeline, making the water flowing out to the nozzles using more, more power. The commonly used booster pump is an automatic pump ... And when the user closes the tap in, the pump also automatically turns off.

What is a booster pump?

The pump is used for the purpose of increasing the pressure of water circulating in the pipeline, making the water flowing out to the nozzles using more, more power. The commonly used booster pump is an automatic pump ... And when the user closes the tap in, the pump also automatically turns off.

What is a booster pump?

The pump is used for the purpose of increasing the pressure of water circulating in the pipeline, making the water flowing out to the nozzles using more, more power. The commonly used booster pump is an automatic pump ... And when the user closes the tap in, the pump also automatically turns off.

What is a booster pump?

The pump is used for the purpose of increasing the pressure of water circulating in the pipeline, making the water flowing out to the nozzles using more, more power. The commonly used booster pump is an automatic pump ... And when the user closes the tap in, the pump also automatically turns off.

What is a booster pump?

The pump is used for the purpose of increasing the pressure of water circulating in the pipeline, making the water flowing out to the nozzles using more, more power. The commonly used booster pump is an automatic pump ... And when the user closes the tap in, the pump also automatically turns off.

What is a booster pump?

The pump is used for the purpose of increasing the pressure of water circulating in the pipeline, making the water flowing out to the nozzles using more, more power. The commonly used booster pump is an automatic pump ... And when the user closes the tap in, the pump also automatically turns off.

What is a booster pump?

The pump is used for the purpose of increasing the pressure of water circulating in the pipeline, making the water flowing out to the nozzles using more, more power. The commonly used booster pump is an automatic pump ... And when the user closes the tap in, the pump also automatically turns off.

The booster pump system runs 2 pumps or 3 pumps.

The flow rate of the pump meets the water demand in the pipeline, from which the control system calls 1 running pump or 2 running pumps or all 3 running pumps. Control system with inverter, with LCD panel.

he system consists of a system of vertical pumps (2 ~ 5) which are mounted on a steel base. Connect the nozzle and push head together with the main pipe D100mm ~ 200mm, the accumulator 100l ~ 200l, the control cabinet with LCD instruction, touch control. Optimization during operation and use.

The new pump is 100% locally assembled or completely imported.

The booster pump system runs 2 pumps or 3 pumps.

The flow rate of the pump meets the water demand in the pipeline, from which the control system calls 1 running pump or 2 running pumps or all 3 running pumps. Control system with inverter, with LCD panel.

he system consists of a system of vertical pumps (2 ~ 5) which are mounted on a steel base. Connect the nozzle and push head together with the main pipe D100mm ~ 200mm, the accumulator 100l ~ 200l, the control cabinet with LCD instruction, touch control. Optimization during operation and use.

The new pump is 100% locally assembled or completely imported.

9100 Series Fire Pumps

Features

• UL listed and FM approved
• 500 to 5000 gpm, 90 to 205 psi
• Cast Iron Bronze Fitted, Ductile Iron “H” casing option for high pressure
• Flex coupled
• Electric motor or diesel driven
• Common flange centerline
• Bolt-on stuffing box

AC Fire Pump 8200 Series Horizontal Split Case Fire Pumps

Features

• UL listed and FM approved
• 500 to 1000 gpm, 70 to 440 psi
• Single suction, 2 stage design
• Cast Iron Bronze Fitted, Ductile Iron “H” casing option for high pressure
• Flex coupled
• Electric motor or diesel driven
• Horizontally offset flange centerline
• Bolt-on stuffing box

AC Fire Pump 8100 Series

• Features

  • UL listed and FM approved
  • 100 to 3000 gpm, 40 to 230 psi
  • Cast Iron Bronze Fitted, Ductile Iron “H” casing option for high pressure
  • Flex coupled
  • Electric motor or diesel engine driven
  • Common flange centerline
  • Single piece stuffing box

  AC Fire Pump offers a range of split case pumps with spacing-saving designs to simplify pump room layout. The 8100 Series fire pump is designed to provide water to stand pipe, sprinkler, chemical mitigation and hydrant systems for fire suppression in industrial and commercial facilities. Suction and discharge flanges are on a common centerline for easy installation. Impellers are dynamically balanced to reduce vibration and potential wear. In compliance with NFPA #20, UL, ULC, FM and ANSI.

• Featured

• 100 to 3000 gpm, 40 to 230 psi
•  Fitted in cast iron bronze, optional ductile iron “H” sheath for high pressure
• Flexible coupling 
• Electric motor or driven diesel engine
• Common flange centerline One-piece packing box

The AC fire pump offers a variety of separate pumps with a distance-saving design to simplify pump room layout.

The 8100 Series fire pump is designed to supply water to vertical piping systems, water spray systems, chemical minimization, and water supply for extinguishing fires in industrial and commercial facilities.

The suction and discharge flanges lie on a common centerline for easy installation

The impeller is dynamically balanced to reduce vibration and wear. Comply with NFPA # 20, UL, ULC, FM and ANSI.

Control cabinet sets the pressure according to the pressure level: Pressure compensation pump - >> Electric pump

Power failure Oil Pump automatically runs when reducing pressure. There is an anti-dry report.

160kw electric pump, R = 2900rpm ID 150mm, OD = 125mm. 100% new products have been inspected by the BCA Fire Protection Department. Made in Viet Nam

75kw oil pump, R = 2900rpm ID 150mm, OD = 125mm. 100% new products have been inspected by the BCA Fire Protection Department. Imported complete units from China

The control cabinet sets the pressure according to the pressure level: Pressure compensation pump - >> Electric pump. Power failure Oil Pump automatically runs when reducing pressure. There is an anti-dry report

132kw electric pump, R = 2900rpm ID 150mm, OD = 125mm. 100% new products have been inspected by the BCA Fire Protection Department. Made in Vietnam

132kw oil pump, R = 2900rpm ID 150mm, OD = 125mm. 100% new products have been inspected by the BCA Fire Protection Department. Imported complete units from China

The control cabinet sets the pressure according to the pressure level: Pressure compensation pump - >> Electric pump. Power failure Oil Pump automatically runs when reducing pressure

Booster pump: Q=(1.2~12)m3, (H=122~42)m, P=3kw

10kw electric pump, R = 2900rpm ID 150mm, OD = 125mm. 100% new products have been inspected by the BCA Fire Protection Department. Made in Viet Nam

Specifications:

• Flow : Max: 850 m³/h·     
• Head: Max: 950m·       
• Pump chamber pressure: Max 100bar·       
• Working temperature: Max 180⁰C·       
• Power: 2.2kw - 1250kw·       
• Power supply: 380 / 690V·       
• Insulation class: Class F·       
• Protection level: IP 55

Specifications:

• Flow : Max: 40 m³/h·      
• Head: Max: 14.5m·      
• Working temperature: Max 40⁰C·       
• Solids through pump: Max 5mm·       
• Power :0.55 – 1.5kw·       
• Maximum depth: 10m·       
• Power supply: 230V / 380V·       
• Cable length: 10m·       
• Insulation class: Class F·       
• Protection level: IP 68 

Specifications:

• Flow: Max: 7.2 m3 / h·       
• Head: Max: 60m·       
• Pump chamber pressure: Max 8bar·       
• Working temperature: Max 80⁰C ·       
• Power: 0.3kw - 0.9kw·       
• Power supply: 230V / 380V·       
• Insulation class: Class F·       
• Protection level: IP 55

Specifications:

Specifications:

Specifications:

Specifications:

• Flow: Max: 1800m3 / h

Pumps Lowara e-LNE SERIES and e-LNT SERIES

Anti-corrosion submersible pump:

The submersible pump does not cause clogging and is highly efficient:

The vortex pump D 3000 and D 8200 are designed as a free-form design that does not cause clogging, do not allow low efficiency and flow rates reach 100 l / s (1,600 gpm), and the engine is about 1.5 - 7.4 kW 2 to 6 hp.

The pump is designed for use in harsh conditions such as municipal wastewater and industrial wastewater.

High efficiency, lasting, maximum uptime and lowest cost.

N-vane pumps achieve flow rates up to 1,000 l / s (16.000 gpm) with motors from 1.3 to 310 kW (1.5 to 415 hp) and head up to 100m(300ft). The pump features innovative self-cleaning and this function is the smartest choice for many applications.

Flygt F-pump series Cut propeller pump.

Flygt with F-type paddlewheels up to 200 l / s (3200 gpm),
with motors from 1.7 to 47 kW (2 to 65 hp) and head up to 81m(260ft).The energy-efficient F-type pump is specially designed for hard application and continuously maintained hydraulic efficiency, sustainable in wastewater treatment applications, Sludge treatment, and agricultural applications.

Booster in the more application

Pump C stainless steel version reaches a capacity of up to 200l / s(3,200 gpm) with motors with capacities from 2.4 to 54 kW(3 to 72 hp). Pumps are commonly used for the drainage of highly corrosive industrial wastewater

Flygt C-pumps 3068-3800 C pump spiral groove paddle.

Flygt pump range with C-type reel with capacity up to 3000l / s(48000 gpm), motor up to 775kW(1050 hp). The standard of this product line is designed with cast iron for use in urban wastewater treatment fields, industrial zones. The product has an explosion proof version.

FLYGT submersible pump

Model: N3153.185HT

-Code: 454

- Work point

- Q = 29 l / s

- H = 17.1 m

- Power: 9 kw

- Voltage: 380V - 50Hz

Wing diameter: 250mm

- Rotation speed: 1460 rpm

- Wing material: SUS304

- FLS water sensor (built in

pump)

-Heat point heat

-Cable controller: 10m

Accessories include:

- Quick coupling DN 100

- Minicas II control unit

-Bulong screws

- Guide bar clamp

FLYGT submersible pump

Model:N3153.185HT

• Code: 454
• Work point - Q = 29 l / s
• - H = 17.1 m - Power: 9 kw
• - Voltage: 380V - 50Hz
• - Wing diameter: 250mm
• - Rotation speed: 1460 rpm
• - Wing material: hard iron
• - FLS water sensor (built in pump)
• -Heat point heat
• -Cable controller: 10m
• - Accessories include: Quick coupling DN 100
• -Minicas II control unit
• -Bulong screws
• -Guide bar clamp

FLYGT submersible pump

Model:N3153.181HT

-Code: 454

- Work point

- Q = 29 l / s

- H = 17.1 m

- Power: 9 kw

- Voltage: 380V - 50Hz

• Wing diameter: 250mm

  - Rotation speed: 1460 rpm

  - Wing material: hard iron

  - FLS water sensor (built in

  pump)

  -Heat point heat

  -Cable controller: 10m

  Accessories include:

  Quick coupling DN 100

  Minicas II control unit

  -Bulong screws

  Guide bar clamp