| Manufacturer | ABB |
| Transformer type | Seal type, oil immersion |
| Wattage MBA | 1000 kVA |
| The pressure is not loaded at high voltage | 22 kV |
| voltage does not load the low- voltage side | 0,4 kV |
| pharse | 3 |
| frequency | 50 Hz |
| The first voltage adjustment on the high-voltage side | 22kV±2x5 % |
| Wiring team | Dyn-11 |
| Short circuit voltage | 6 % |
| No load loss | 1600 W |
| Short circuit loss at 75 ⁰C | 12000 W |
| Noise level | 55 dB |
| Coolant | ONAN |
| Type of oil | Mineral oil |
| Maximum ambient temperature | 40 ⁰C |
| The temperature rise of the top oil layer | 60 ⁰C |
| The temperature rise of the wire | 65 ⁰C |
| Maximum high voltage | 24 kV |
| CA coil test voltage at 50Hz for 1 min | 50 kV |
| High-voltage winding pulse test voltage 1,2µs | 125 kV |
| Insulation level | A |
| Stringing material | Copper |
| Color of paint | Gray-RAL 7033 |
| Kind of paint | Powder Coating |
| Wheel center distance | 820 mm |
| Oil volume (estimated) | 700 kg |
| Accessories | Oil indicator |
| Accessories | Vpressure safety contacts |
| Accessories | Oil drain valve |
| Accessories | Slight relays with contacts |
| Accessories | Thermometer with contact |
| Compliance with standards | IEC 76 |
