Korean polymer lightning protector PLA.
8,250,000 VND
Working principle of lightning protection valve:
When there is an atmospheric overvoltage or internal overvoltage problem. The lightning protection valve generates a path that returns current to earth and then restores the normal state under operating conditions. Some current line surge arrester and medium voltage lightning arrester have a breaker connected in series to the end of the surge valve. This breaker will operate when there is a power frequency failure
If you need advice or installation, contact: 0969002382 for the best support.
7,500,000 VND
LIGHTNING CONDUCTOR (LA)
Applicable standards: IEC 60099-4
Type: Gapless, consisting of metal oxide resistor discs stacked and linked to 2 electrodes.
Lightning protection level: Level 1
Rated voltage (Ur): 12kV to 48kV
Rated discharge current: 10kA
Rated frequency: 50Hz
Creepage distances: 440mm to 1477mm
Insulation: Polymer (Silicone Rubber)
cut fuse with load LBFCO) - POLYMER
12,500,000 VND
cut fuse with load LBFCO) - POLYMER
Applicable standards: ANSI C37.42, IEC 60282-2, IEC 61109
Rated voltage: 24kV
Rated current: 100A & 200A
Rated frequency: 50Hz
Short-circuit breaking capacity: 12kA
Impulse voltage endurance (BIL): 150kV
Leakage current length: 635mm
Insulation: Polymer (Silicone Rubber)
11,500,000 VND
cuter fuse with load(LBFCO)
Applicable standards: ANSI C37.42, IEC 60282-2, IEC 62217, IEC 61109
Rated voltage: 24kV
Rated current: 100A & 200A
Rated frequency: 50Hz
Short-circuit breaking capacity: 12kA
Impulse voltage endurance (BIL): 125kV, 150kV
Leakage current length: 340mm, 440mm
Insulation material: Porcelain
fuse itself falls (FCO) - POLYMER
8,500,000 VND
fuse itself falls (FCO) - POLYMER
Applicable standards: ANSI C37.42, IEC 60282-2, IEC 62217, IEC 61109
Rated voltage: 24kV & 35kV
Rated current: 100A & 200A
Rated frequency: 50Hz
Short-circuit breaking capacity: 12kA
Impulse voltage endurance (BIL):
+ Type 24kV: 150kV
+ Type 35kV: 200kV
Leakage current length:
+ Type 24kV: 635mm
+ Type 35kV: 980mm
Insulation: Polymer (Silicone Rubber)
6,850,000 VND
fuse itself falls (FCO)I (FCO)
Applicable standards: ANSI C37.42, IEC 60282-2, IEC 62217, IEC 61109
Rated voltage: 24kV & 35kV
Rated current: 100A & 200A
Rated frequency: 50Hz Short-circuit
breaking capacity: 12kA
Impulse voltage endurance (BIL):
+ Type 24kV: 125kV; 150kV
+ Type 35kV: 170kV
Leakage current length:
+ Type 24kV: 340mm, 440mm
+ Type 35kV: 720mm
Insulation material: Porcelain
5,800,000,000 VND
3M Electrical Cable Terminations
3M electrical cable terminations feature cold shrink technology, which is engineered for easy installation and long-term performance in the field. Cold shrink was introduced by 3M over 40 years ago and provides faster, easier installation and long-term reliability.
Our cold shrink terminations offer a reliable sealing solution for medium and high voltage applications, and are simple to install even in confined work areas – helping you save time and money. 3M electrical cable terminations cover a wide range of voltage levels from 5 kV to 145 kV.
5,850,000 VND
3M Electrical Cable Terminations
3M electrical cable terminations feature cold shrink technology, which is engineered for easy installation and long-term performance in the field. Cold shrink was introduced by 3M over 40 years ago and provides faster, easier installation and long-term reliability.
Our cold shrink terminations offer a reliable sealing solution for medium and high voltage applications, and are simple to install even in confined work areas – helping you save time and money. 3M electrical cable terminations cover a wide range of voltage levels from 5 kV to 145 kV.
6,200,000 VND
3M Electrical Cable Terminations
3M electrical cable terminations feature cold shrink technology, which is engineered for easy installation and long-term performance in the field. Cold shrink was introduced by 3M over 40 years ago and provides faster, easier installation and long-term reliability.
Our cold shrink terminations offer a reliable sealing solution for medium and high voltage applications, and are simple to install even in confined work areas – helping you save time and money. 3M electrical cable terminations cover a wide range of voltage levels from 5 kV to 145 kV.
6,850,000 VND
3M Electrical Cable Terminations
3M electrical cable terminations feature cold shrink technology, which is engineered for easy installation and long-term performance in the field. Cold shrink was introduced by 3M over 40 years ago and provides faster, easier installation and long-term reliability.
Our cold shrink terminations offer a reliable sealing solution for medium and high voltage applications, and are simple to install even in confined work areas – helping you save time and money. 3M electrical cable terminations cover a wide range of voltage levels from 5 kV to 145 kV.
7,200,000 VND
3M Electrical Cable Terminations
3M electrical cable terminations feature cold shrink technology, which is engineered for easy installation and long-term performance in the field. Cold shrink was introduced by 3M over 40 years ago and provides faster, easier installation and long-term reliability.
Our cold shrink terminations offer a reliable sealing solution for medium and high voltage applications, and are simple to install even in confined work areas – helping you save time and money. 3M electrical cable terminations cover a wide range of voltage levels from 5 kV to 145 kV.
7,500,000 VND
3M Electrical Cable Terminations
3M electrical cable terminations feature cold shrink technology, which is engineered for easy installation and long-term performance in the field. Cold shrink was introduced by 3M over 40 years ago and provides faster, easier installation and long-term reliability.
Our cold shrink terminations offer a reliable sealing solution for medium and high voltage applications, and are simple to install even in confined work areas – helping you save time and money. 3M electrical cable terminations cover a wide range of voltage levels from 5 kV to 145 kV.
7,200,000 VND
3M Electrical Cable Terminations
3M electrical cable terminations feature cold shrink technology, which is engineered for easy installation and long-term performance in the field. Cold shrink was introduced by 3M over 40 years ago and provides faster, easier installation and long-term reliability.
Our cold shrink terminations offer a reliable sealing solution for medium and high voltage applications, and are simple to install even in confined work areas – helping you save time and money. 3M electrical cable terminations cover a wide range of voltage levels from 5 kV to 145 kV.
Cable head 24kv-3x240SQ T-Plug 3M
12,500,000 VND
Silicon cold shrink cable head 3M QTII 24kV 35kV 40.5kV
+Cold shrink cable head (cold shrink) 3M 24kV indoor single phase & 3 phase outdoor (3x35mm2, 3x50mm2, 3x70mm2, 3x95mm2, 3x120mm2, 3x150mm2, 3x185mm2, 3x240mm2, 3x300mm2, 3x400mm2, 1x500mm2, 1x630mm2 copper core, aluminum core core, 1 hole, 1 hole aluminum core. 3M Cable QTII Temination Kit Indoor & Outdoor, Single phase - Three phase with Cooper Lug, Al lug, Dimetalic Lug
+Cold shrink cable head (cold shrink) 3M 35kV 40.5kV indoor single phase & 3 phase outdoor (3x35mm2, 3x50mm2, 3x70mm2, 3x95mm2, 3x120mm2, 3x150mm2, 3x185mm2, 3x240mm2, 3x300mm2, 3x400mm2, 3x500mm2, 1x800mm2, 3x500mm2 , 1x1000mm2) copper core head, aluminum core core, 1 hole, 1 hole aluminum core. 3M QTII Cable Temination Kit Indoor & Outdoor, Single phase - Three phase with Cooper Lug, Al lug, Dimetalic Lug
Cable head 24kv-3x120SQ T-Plug 3M
11,500,000 VND
Silicon cold shrink cable head 3M QTII 24kV 35kV 40.5kV
+Cold shrink cable head (cold shrink) 3M 24kV indoor single phase & 3 phase outdoor (3x35mm2, 3x50mm2, 3x70mm2, 3x95mm2, 3x120mm2, 3x150mm2, 3x185mm2, 3x240mm2, 3x300mm2, 3x400mm2, 1x500mm2, 1x630mm2 copper core, aluminum core core, 1 hole, 1 hole aluminum core. 3M Cable QTII Temination Kit Indoor & Outdoor, Single phase - Three phase with Cooper Lug, Al lug, Dimetalic Lug
+Cold shrink cable head (cold shrink) 3M 35kV 40.5kV indoor single phase & 3 phase outdoor (3x35mm2, 3x50mm2, 3x70mm2, 3x95mm2, 3x120mm2, 3x150mm2, 3x185mm2, 3x240mm2, 3x300mm2, 3x400mm2, 3x500mm2, 1x800mm2, 3x500mm2 , 1x1000mm2) copper core head, aluminum core core, 1 hole, 1 hole aluminum core. 3M QTII Cable Temination Kit Indoor & Outdoor, Single phase - Three phase with Cooper Lug, Al lug, Dimetalic Lug
Cable head 24kv-3x95SQ T-Plug 3M
9,500,000 VND
Silicon cold shrink cable head 3M QTII 24kV 35kV 40.5kV
+Cold shrink cable head (cold shrink) 3M 24kV indoor single phase & 3 phase outdoor (3x35mm2, 3x50mm2, 3x70mm2, 3x95mm2, 3x120mm2, 3x150mm2, 3x185mm2, 3x240mm2, 3x300mm2, 3x400mm2, 1x500mm2, 1x630mm2 copper core, aluminum core core, 1 hole, 1 hole aluminum core. 3M Cable QTII Temination Kit Indoor & Outdoor, Single phase - Three phase with Cooper Lug, Al lug, Dimetalic Lug
+Cold shrink cable head (cold shrink) 3M 35kV 40.5kV indoor single phase & 3 phase outdoor (3x35mm2, 3x50mm2, 3x70mm2, 3x95mm2, 3x120mm2, 3x150mm2, 3x185mm2, 3x240mm2, 3x300mm2, 3x400mm2, 3x500mm2, 1x800mm2, 3x500mm2 , 1x1000mm2) copper core head, aluminum core core, 1 hole, 1 hole aluminum core. 3M QTII Cable Temination Kit Indoor & Outdoor, Single phase - Three phase with Cooper Lug, Al lug, Dimetalic Lug
Cable head 3M 24kv-3x70SQ T-Plug
9,500,000 VND
Silicon cold shrink cable head 3M QTII 24kV 35kV 40.5kV
+Cold shrink cable head (cold shrink) 3M 24kV indoor single phase & 3 phase outdoor (3x35mm2, 3x50mm2, 3x70mm2, 3x95mm2, 3x120mm2, 3x150mm2, 3x185mm2, 3x240mm2, 3x300mm2, 3x400mm2, 1x500mm2, 1x630mm2 copper core, aluminum core core, 1 hole, 1 hole aluminum core. 3M Cable QTII Temination Kit Indoor & Outdoor, Single phase - Three phase with Cooper Lug, Al lug, Dimetalic Lug
+Cold shrink cable head (cold shrink) 3M 35kV 40.5kV indoor single phase & 3 phase outdoor (3x35mm2, 3x50mm2, 3x70mm2, 3x95mm2, 3x120mm2, 3x150mm2, 3x185mm2, 3x240mm2, 3x300mm2, 3x400mm2, 3x500mm2, 1x800mm2, 3x500mm2 , 1x1000mm2) copper core head, aluminum core core, 1 hole, 1 hole aluminum core. 3M QTII Cable Temination Kit Indoor & Outdoor, Single phase - Three phase with Cooper Lug, Al lug, Dimetalic Lug
9,500,000 VND
Silicon cold shrink cable head 3M QTII 24kV 35kV 40.5kV
+ Cold shrink cable head (cold shrink) 3M 24kV indoor single phase & 3 phase outdoor (3x35mm2, 3x50mm2, 3x70mm2, 3x95mm2, 3x120mm2, 3x150mm2, 3x185mm2, 3x240mm2, 3x300mm2, 3x400mm2, 1x500mm2, 1x630mm2 1x1000mm2) copper core core, aluminum core core, 1 hole aluminum core, 1 hole. 3M Cable QTII Temination Kit Indoor & Outdoor, Single phase - Three phase with Cooper Lug, Al lug, Dimetalic Lug
+ Cold shrink cable head (cold shrink) 3M 35kV 40.5kV indoor single phase & 3 phase outdoor (3x35mm2, 3x50mm2, 3x70mm2, 3x95mm2, 3x120mm2, 3x150mm2, 3x185mm2, 3x240mm2, 3x300mm2, 3x400mm2, 3x500mm2, 1x800mm2, 1x1000mm2) copper core head, aluminum core core, 1 hole aluminum core, 1 hole. 3M QTII Cable Temination Kit Indoor & Outdoor, Single phase - Three phase with Cooper Lug, Al lug, Dimetalic Lug
7,500,000 VND
Fuse XRNT-40,5kv-80A The medium voltage tube fuse is a tubular fuse for the medium voltage grid. Medium voltage pipe fuse 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards.
7,520,000 VND
The medium voltage tube fuse is a tubular fuse for the medium voltage grid. Medium voltage pipe fuse 40,5kv ~ 50kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards.
5,200,000 VND
Medium voltage lead tube 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards.
5,200,000 VND
Medium voltage lead tube 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All products of SAMNUNG guarantee the standards of electric power.
5,200,000 VND
Medium voltage fuse,Medium voltage lead tube 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards.
5,200,000 VND
Medium voltage tube fuse 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards.
5,200,000 VND
Medium voltage lead tube 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards.
18,900,000 VND
Fuses
MV fuses up to 40.5 kV for indoor and/or outdoor application, commonly known as high-voltage fuses, provide main or back-up protection against overload and overcurrents.
Product description
Medium voltage current limiting and expulsion fuses suitable for the protection of distribution transformers, voltage transformers, capacitor banks, motor circuits and installations with other switching apparatus.
Key benefits
- Capable to control full range of overload currents either in combination with switching apparatus or as sole protection
- Economic protection devices for immediate interruption of high short circuit currents that significantly increase isolation life time
- High mechanical and thermal resistance of housing materials
Key features
- Special design optimized for type of application
- Two fuse housing materials are applicable – porcelain and resin-fiberglass
- Application: indoor and outdoor
17,500,000 VND
Fuses
MV fuses up to 40.5 kV for indoor and/or outdoor application, commonly known as high-voltage fuses, provide main or back-up protection against overload and overcurrents.
Product description
Medium voltage current limiting and expulsion fuses suitable for the protection of distribution transformers, voltage transformers, capacitor banks, motor circuits and installations with other switching apparatus.
Key benefits
- Capable to control full range of overload currents either in combination with switching apparatus or as sole protection
- Economic protection devices for immediate interruption of high short circuit currents that significantly increase isolation life time
- High mechanical and thermal resistance of housing materials
Key features
- Special design optimized for type of application
- Two fuse housing materials are applicable – porcelain and resin-fiberglass
- Application: indoor and outdoor
17,200,000 VND
Fuses
MV fuses up to 40.5 kV for indoor and/or outdoor application, commonly known as high-voltage fuses, provide main or back-up protection against overload and overcurrents.
Product description
Medium voltage current limiting and expulsion fuses suitable for the protection of distribution transformers, voltage transformers, capacitor banks, motor circuits and installations with other switching apparatus.
Key benefits
- Capable to control full range of overload currents either in combination with switching apparatus or as sole protection
- Economic protection devices for immediate interruption of high short circuit currents that significantly increase isolation life time
- High mechanical and thermal resistance of housing materials
Key features
- Special design optimized for type of application
- Two fuse housing materials are applicable – porcelain and resin-fiberglass
- Application: indoor and outdoor
15,300,000 VND
Fuses
MV fuses up to 40.5 kV for indoor and/or outdoor application, commonly known as high-voltage fuses, provide main or back-up protection against overload and overcurrents.
Product description
Medium voltage current limiting and expulsion fuses suitable for the protection of distribution transformers, voltage transformers, capacitor banks, motor circuits and installations with other switching apparatus.
Key benefits
- Capable to control full range of overload currents either in combination with switching apparatus or as sole protection
- Economic protection devices for immediate interruption of high short circuit currents that significantly increase isolation life time
- High mechanical and thermal resistance of housing materials
Key features
- Special design optimized for type of application
- Two fuse housing materials are applicable – porcelain and resin-fiberglass
- Application: indoor and outdoor
11,500,000 VND
Fuses
MV fuses up to 40.5 kV for indoor and/or outdoor application, commonly known as high-voltage fuses, provide main or back-up protection against overload and overcurrents.
Product description
Medium voltage current limiting and expulsion fuses suitable for the protection of distribution transformers, voltage transformers, capacitor banks, motor circuits and installations with other switching apparatus.
Key benefits
- Capable to control full range of overload currents either in combination with switching apparatus or as sole protection
- Economic protection devices for immediate interruption of high short circuit currents that significantly increase isolation life time
- High mechanical and thermal resistance of housing materials
Key features
- Special design optimized for type of application
- Two fuse housing materials are applicable – porcelain and resin-fiberglass
- Application: indoor and outdoor
Cutters with load 3P-630A-35KV
28,500,000 VND
CUTTER WITH LOAD 3P - 630A - 35KV OUTDOOR
Applicable standards: IEC 60129, IEC 61109
Rated voltage: 35kV
Rated current: 630A
Rated frequency: 50Hz
Resistance to short circuit: 25kA / 1s (3s)
Impulse voltage endurance (BIL): 125kV, 200kV
Leakage current length: 25mm / kV Arc stamping chamber:
Oil Insulation material: Polymer (Silicone rubber)
CUTTER WITH LOAD 3P-630A-24KV, OUTDOOR
24,500,000 VND
CUTTER WITH LOAD 3P-630A-24KV, OUTDOOR
Applied standard: IEC 60129, IEC 61109
Rated voltage: 24kV
Electricquota: 630A
Rated frequency: 50Hz
Resistance to short circuit: 25kA/1s (3s)
Impulse voltage endurance(BIL): 125kV, 200kV
Leakage current length: 25mm/kV
Arc stamping chamber: Oil
Insulation materials: Polymer (Silicone rubber)
Load break switch shinshung 25.8kv
25,400,000 VND
TECHNICAL DATA
| DESCRIPTION | SILO |
|---|---|
| Rated Maximum Voltage | 25.8 kV |
| Rated Continuous Current | 630 A |
| Rated Short-Time Withstand Current | 12.5kA / 1 seg |
| Making Current | 32.5 kA(Máximo), 5 vezes |
| Power Frequency Withstand Voltage | 60 kV / 1 min (Seco) 50 kV / 10 seg (Húmido) |
| Impulse Withstand Voltage | 150 kV |
27,000,000 VND
-Made in Viet Nam
-Dong Anh brand
TYPE | UNIT | DPN 24 KV | DPN 35 KV |
Rated voltage | kV | 24 | 35 |
Maximum continuous operating voltage | kV | 27 | 40,5 |
Rated current | A | 630 | 630 |
Rate peak withstand current | kA/3s | 25 | 25 |
Power frequency withstand voltage | kV | 65 | 95 |
BIL1,2/50µs (Lightning impulse withstand voltage) | kV | 150 | 200 |
Minimum creepage distance | mm/kV | 25 | 25 |
Arc extinguishing environment |
| (Oil) | (Oil) |
Insulation materials |
|
(Porcelain) |
(Porcelain) |
SPILLS 1 PHA - OUTDOOR POLYMER
8,500,000 VND
SPILLS 1 PHA - OUTDOOR POLYMER
Applicable standards: IEC 60129, IEC 61109
Rated voltage: 24kV & 35kV
Rated current: 630A, 800A
Rated frequency: 50Hz
Resistance to short circuit: 25kA / 1s (3s)
Impulse voltage endurance (BIL): 150kV, 170kV
Leakage current length: 25mm / kV
Insulation material: Polymer
6,850,000 VND
SPILLS 1 PHA - OUTDOOR POLYMER
Applicable standards: IEC 60129, IEC 61109
Rated voltage: 24kV & 35kV
Rated current: 630A, 800A
Rated frequency: 50Hz
Resistance to short circuit: 25kA / 1s (3s)
Impulse voltage endurance (BIL): 150kV, 170kV
Leakage current length: 25mm / kV
Insulation material: Polymer
SF6 gas insulated 38kV load breaker (automatic...
122,000,000 VND
126,000,000 VND
SF6 gas insulated 38kV load breaker (automatic switching type)
Model: SPGAS-38-A Rating: 38kV, 630A, 12.5kA, 150kV BIL, 50Hz
- SF6 gas insulation
- Silicon insulated pipe & 2-hole NEMA connector.
- Spring reversal mechanism.
- Need to close / cut by hand.
- Gas pressure gauge and stroke counter onions.
- There is a closed or off status indicator
- Need to lock / close.
- 3 line sensors (1000: 1 / A ratio line sensors) & 3 voltage sensors
- Control cabinet R6 with RTU
- - Communication protocol: DNP3.0 or IEC60870-5- 101/104
- -. Communication port: 2 RS232 ports (1 port for for spot connection, 1 for SCADA connection)
- Including mounting bracket
- includes the core.
- Power cable & control cable included (Power supply transformer not included)
SF6 gas insulated 27kV load breaker (automatic...
103,000,000 VND
108,000,000 VND
SF6 gas insulated 27kV load breaker (automatic switching type)
Model: SPGAS-26-A
Rating: 27kV, 630A, 12.5kA, 150kV BIL, 50Hz
*Gas insulation SF6
*Silicon insulated pipe & 2-hole NEMA connector.
*Spring reversal mechanism.
*Need to close / cut by hand.
* Gas pressure gauge and stroke counter onions.
*There is a closed or off state indicator
*Need to lock / close
*3 line sensors (1000: 1 / A ratio line sensors) & 3 voltage sensors
* Control cabinet R6 with RTU
-Communication protocol: DNP3.0 or IEC60870-5- 101/104
-.Communication port: 2 RS232 ports (1 port for for spot connection, 1 for SCADA connection)
*including mounting bracket
*including the core.
*Power cable & control cable included (Power supply transformer not included)
125,000,000 VND
Recloser 24kv Series Outdoor High Voltage Vacuum Circuit Breaker
21,000,000 VND
main function:– RTU EMT can be easily adapted to any LBS / SECTIONALIZER / Recloser / CB controller for SCADA system.
–Applicable to RF / GSM / CDMA communication networks
–Own protocol with our operating software, or DNP 3.0 protocol.
–Very compact and simple applicable for LBS / SECTIONALIZER / recloser / CB
–Remote control ON / OFF Operation for two switches
–Monitor current value data (Voltage)
–LBS / SECTIONALIZER / reclose status
– RS 232 connection / Switching pulse mode
–DNP 3.0 protocol
260,000,000 VND
Recloser is a cutting machine with a self-closing function, So when the problem (mostly transient) it will close, if the problem goes away it will supply power again, ensure uninterrupted power supply. This is extremely important for large factories, operating on automatic line.
190,000,000 VND
Recloser is a circuit breaker with a self-closing function, so when the problem (mostly transient), it will close itself
if the problem goes away it will supply power again, ensure uninterrupted power supply. This is extremely important for large factories that operate on automated lines.
Recloser shinshung 38kv repeat cutter
245,000,000 VND
TECHNICAL DATA
| Description | SIREC-27 | SIREC-38 |
|---|---|---|
| Rated Maximum Voltage | 27 kV | 38 kV |
| Rated Continuous Current | 630 A | 800 A |
| Making Current | 12.5 kA | 16 kA |
| Short-time Withstand Current | 12.5 kA / 1 sec | 16 kA / 1 sec |
| Min. Interrupting Time | 3 cycles | 3 cycles |
| Min. Reclosing Time | 0.5 sec | 0.5 sec |
| Impulse Withstand Voltage | 150 kV | 170 kV |
| Power Frequency Withstand Voltage | 60 kV | 70 kV |
Recloser shinshung 27kv repeat cutter
185,000,000 VND
| Description | SIREC-27 | SIREC-38 |
|---|---|---|
| Rated Maximum Voltage | 27 kV | 38 kV |
| Rated Continuous Current | 630 A | 800 A |
| Making Current | 12.5 kA | 16 kA |
| Short-time Withstand Current | 12.5 kA / 1 sec | 16 kA / 1 sec |
| Min. Interrupting Time | 3 cycles | 3 cycles |
| Min. Reclosing Time | 0.5 sec | 0.5 sec |
| Impulse Withstand Voltage | 150 kV | 170 kV |
| Power Frequency Withstand Voltage | 60 kV | 70 kV |
335,500,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
552,600,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
585,000,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
455,000,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
268,500,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
256,000,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
176,000,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
156,000,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
547,800,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
410,650,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
335,600,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
265,500,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
5,200,000 VND
Medium voltage lead tube 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards.
Medium voltage tube fuse XRNT-24kv-50A
5,100,000 VND
Medium voltage lead tube 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards.
4,800,000 VND
Medium voltage lead tube 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards.
4,800,000 VND
Medium voltage lead tube 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards.
4,800,000 VND
Medium voltage lead tube 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards.
4,800,000 VND
Medium voltage lead tube 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards
4,800,000 VND
Medium voltage lead tube 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards
12,800,000 VND
Fuses
MV fuses up to 40.5 kV for indoor and/or outdoor application, commonly known as high-voltage fuses, provide main or back-up protection against overload and overcurrents.
Product description
Medium voltage current limiting and expulsion fuses suitable for the protection of distribution transformers, voltage transformers, capacitor banks, motor circuits and installations with other switching apparatus.
Key benefits
- Capable to control full range of overload currents either in combination with switching apparatus or as sole protection
- Economic protection devices for immediate interruption of high short circuit currents that significantly increase isolation life time
- High mechanical and thermal resistance of housing materials
Key features
- Special design optimized for type of application
- Two fuse housing materials are applicable – porcelain and resin-fiberglass
- Application: indoor and outdoor
12,800,000 VND
Fuses
MV fuses up to 40.5 kV for indoor and/or outdoor application, commonly known as high-voltage fuses, provide main or back-up protection against overload and overcurrents.
Product description
Medium voltage current limiting and expulsion fuses suitable for the protection of distribution transformers, voltage transformers, capacitor banks, motor circuits and installations with other switching apparatus.
Key benefits
- Capable to control full range of overload currents either in combination with switching apparatus or as sole protection
- Economic protection devices for immediate interruption of high short circuit currents that significantly increase isolation life time
- High mechanical and thermal resistance of housing materials
Key features
- Special design optimized for type of application
- Two fuse housing materials are applicable – porcelain and resin-fiberglass
- Application: indoor and outdoor
12,500,000 VND
Fuses
MV fuses up to 40.5 kV for indoor and/or outdoor application, commonly known as high-voltage fuses, provide main or back-up protection against overload and overcurrents.
Product description
Medium voltage current limiting and expulsion fuses suitable for the protection of distribution transformers, voltage transformers, capacitor banks, motor circuits and installations with other switching apparatus.
Key benefits
- Capable to control full range of overload currents either in combination with switching apparatus or as sole protection
- Economic protection devices for immediate interruption of high short circuit currents that significantly increase isolation life time
- High mechanical and thermal resistance of housing materials
Key features
- Special design optimized for type of application
- Two fuse housing materials are applicable – porcelain and resin-fiberglass
- Application: indoor and outdoor
10,500,000 VND
Fuses
MV fuses up to 40.5 kV for indoor and/or outdoor application, commonly known as high-voltage fuses, provide main or back-up protection against overload and overcurrents.
Product description
Medium voltage current limiting and expulsion fuses suitable for the protection of distribution transformers, voltage transformers, capacitor banks, motor circuits and installations with other switching apparatus.
Key benefits
- Capable to control full range of overload currents either in combination with switching apparatus or as sole protection
- Economic protection devices for immediate interruption of high short circuit currents that significantly increase isolation life time
- High mechanical and thermal resistance of housing materials
Key features
- Special design optimized for type of application
- Two fuse housing materials are applicable – porcelain and resin-fiberglass
- Application: indoor and outdoor
8,900,000 VND
Fuses
MV fuses up to 40.5 kV for indoor and/or outdoor application, commonly known as high-voltage fuses, provide main or back-up protection against overload and overcurrents.
Product description
Medium voltage current limiting and expulsion fuses suitable for the protection of distribution transformers, voltage transformers, capacitor banks, motor circuits and installations with other switching apparatus.
Key benefits
- Capable to control full range of overload currents either in combination with switching apparatus or as sole protection
- Economic protection devices for immediate interruption of high short circuit currents that significantly increase isolation life time
- High mechanical and thermal resistance of housing materials
Key features
- Special design optimized for type of application
- Two fuse housing materials are applicable – porcelain and resin-fiberglass
- Application: indoor and outdoor
5,200,000 VND
Medium voltage lead tube 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards.
4,800,000 VND
Medium voltage lead tube 24kv ~ 40.5kv. Rated current 16A ~ 100A. Products of Korean company SAMNUNG. SAMNUNG Electrical Equipment Co., Ltd. Korea is a company with over 40 years of experience in the field of electrical equipment manufacturing. All SAMNUNG products ensure the electrical standards
Korean polymer lightning protector PLA.
8,250,000 VND
Working principle of lightning protection valve:
When there is an atmospheric overvoltage or internal overvoltage problem. The lightning protection valve generates a path that returns current to earth and then restores the normal state under operating conditions. Some current line surge arrester and medium voltage lightning arrester have a breaker connected in series to the end of the surge valve. This breaker will operate when there is a power frequency failure
If you need advice or installation, contact: 0969002382 for the best support.
125,000,000 VND
Recloser 24kv Series Outdoor High Voltage Vacuum Circuit Breaker
21,000,000 VND
main function:– RTU EMT can be easily adapted to any LBS / SECTIONALIZER / Recloser / CB controller for SCADA system.
–Applicable to RF / GSM / CDMA communication networks
–Own protocol with our operating software, or DNP 3.0 protocol.
–Very compact and simple applicable for LBS / SECTIONALIZER / recloser / CB
–Remote control ON / OFF Operation for two switches
–Monitor current value data (Voltage)
–LBS / SECTIONALIZER / reclose status
– RS 232 connection / Switching pulse mode
–DNP 3.0 protocol
260,000,000 VND
Recloser is a cutting machine with a self-closing function, So when the problem (mostly transient) it will close, if the problem goes away it will supply power again, ensure uninterrupted power supply. This is extremely important for large factories, operating on automatic line.
190,000,000 VND
Recloser is a circuit breaker with a self-closing function, so when the problem (mostly transient), it will close itself
if the problem goes away it will supply power again, ensure uninterrupted power supply. This is extremely important for large factories that operate on automated lines.
156,000,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
265,500,000 VND
RM6
Medium Voltage Ring Main Units up to 24kV
Part of Set Series
Ring Main Units up to 24kV , Short Time current rating up to 21kA ,rated for Internal arc up to 20kA AFLR with options
Features
- RM6 has been 100% designed by Schneider Electric and carries a long legacy of 30+ years with huge installed base worldwide
- Solution fully type tested by independant international laboratories
- EcostruXure ready
Standard : IEC 62271-200
Rated voltage : Up to 24 kV
Frequency : 50 or 60Hz
Rated current busbar : 630A
Rated current for Load Break switch 630A & Circuit breaker 200A ( for transformer protection ) ,630A ( for Feeder Protection)
Busbar system : Single
Short circuit rated current : Up to 21kA 1 sec
Internal Arc Classification : Up to 20kA AFLR with options
Loss of service continuity : LSC 2A
Partition class: PM
