Anti-corrosion submersible pump:

The submersible pump does not cause clogging and is highly efficient:

The vortex pump D 3000 and D 8200 are designed as a free-form design that does not cause clogging, do not allow low efficiency and flow rates reach 100 l / s (1,600 gpm), and the engine is about 1.5 - 7.4 kW 2 to 6 hp.

The pump is designed for use in harsh conditions such as municipal wastewater and industrial wastewater.

High efficiency, lasting, maximum uptime and lowest cost.

N-vane pumps achieve flow rates up to 1,000 l / s (16.000 gpm) with motors from 1.3 to 310 kW (1.5 to 415 hp) and head up to 100m(300ft). The pump features innovative self-cleaning and this function is the smartest choice for many applications.

Flygt F-pump series Cut propeller pump.

Flygt with F-type paddlewheels up to 200 l / s (3200 gpm),
with motors from 1.7 to 47 kW (2 to 65 hp) and head up to 81m(260ft).The energy-efficient F-type pump is specially designed for hard application and continuously maintained hydraulic efficiency, sustainable in wastewater treatment applications, Sludge treatment, and agricultural applications.

Booster in the more application

Pump C stainless steel version reaches a capacity of up to 200l / s(3,200 gpm) with motors with capacities from 2.4 to 54 kW(3 to 72 hp). Pumps are commonly used for the drainage of highly corrosive industrial wastewater

Flygt C-pumps 3068-3800 C pump spiral groove paddle.

Flygt pump range with C-type reel with capacity up to 3000l / s(48000 gpm), motor up to 775kW(1050 hp). The standard of this product line is designed with cast iron for use in urban wastewater treatment fields, industrial zones. The product has an explosion proof version.

FLYGT submersible pump

Model: N3153.185HT

-Code: 454

- Work point

- Q = 29 l / s

- H = 17.1 m

- Power: 9 kw

- Voltage: 380V - 50Hz

Wing diameter: 250mm

- Rotation speed: 1460 rpm

- Wing material: SUS304

- FLS water sensor (built in

pump)

-Heat point heat

-Cable controller: 10m

Accessories include:

- Quick coupling DN 100

- Minicas II control unit

-Bulong screws

- Guide bar clamp

FLYGT submersible pump

Model:N3153.185HT

• Code: 454
• Work point - Q = 29 l / s
• - H = 17.1 m - Power: 9 kw
• - Voltage: 380V - 50Hz
• - Wing diameter: 250mm
• - Rotation speed: 1460 rpm
• - Wing material: hard iron
• - FLS water sensor (built in pump)
• -Heat point heat
• -Cable controller: 10m
• - Accessories include: Quick coupling DN 100
• -Minicas II control unit
• -Bulong screws
• -Guide bar clamp

FLYGT submersible pump

Model:N3153.181HT

-Code: 454

- Work point

- Q = 29 l / s

- H = 17.1 m

- Power: 9 kw

- Voltage: 380V - 50Hz

• Wing diameter: 250mm

  - Rotation speed: 1460 rpm

  - Wing material: hard iron

  - FLS water sensor (built in

  pump)

  -Heat point heat

  -Cable controller: 10m

  Accessories include:

  Quick coupling DN 100

  Minicas II control unit

  -Bulong screws

  Guide bar clamp