ELW3007-100W high bay factory lights

Product characteristics:

Aluminum alloy shell, black powder coated thick leaf blades help speed up heat dissipation to increase LED chip life.

High power factor> = 0.96 to save energy.

Using CREE LED chips (USA): Laoij high-quality LED chip is the world's 1st class.

The wide voltage range of 100-270VAC prevents the lamp from unexpectedly drop in voltage, suitable for many places with different voltages.

The power adapter is separate from the heatsink compartment of the Led chip to avoid overheating to increase the life of the adapter.

Protection level: IP 65

Installation height: 100W (6m), 150-200W (> = 8m)

Product characteristics:

Aluminum alloy shell, black powder coated thick leaf blades help speed up heat dissipation to increase LED chip life.

High power factor> = 0.96 to save energy.

Using CREE LED chips (USA): Laoij high-quality LED chip is the world's 1st class.

The wide voltage range of 100-270VAC prevents the lamp from unexpectedly drop in voltage, suitable for many places with different voltages.

The power adapter is separate from the heatsink compartment of the Led chip to avoid overheating to increase the life of the adapter.

Protection level: IP 65

Installation height: 100W (6m), 150-200W (> = 8m)

Energy saving:

LED factory lights are lighting with LED chips, operating on the principle of semiconductor.

About the structure of the factory lights ELF1001 includes the following main components: LED chip, control circuit (AC - DC power converter), radiator, lampshade.

Specially integrated power adapter DOB and SMD2835 LED chip for lighting efficiency> 90Lm / W and high power factor PF ≥ 0.95, saving up to 70-80% of power consumption, can be replaced for lamps.

Traditional high pressure. Roman ELF1001 factory lights with unlimited number of on / off times.

Compared with high-pressure lamps, when turned on and off many times, the life of the lamp will be reduced, but with LEDs completely unaffected by this problem.

Roman lamps are installed in factories, industrial zones, where there is a large space and are usually installed at a height of 4 - 6m with the following outstanding features:

The highlight of the product is the integrated power adapter and LED chip that makes it easy to move and install during use.

Led factory lights SAPB 508 Duhal, also known as high pressure led lights, Duhal factory lights are widely used to replace traditional bulbs such as high voltage meta, halogen, suitable for all lighting spaces.

Power: 80W

Voltage: 220v

Size: 360x250

Color temperature 3000k / 6500k

Brand: Duhal

Power: 100W

Size ØxH (mm): 400 × 310

Voltage: 220V / 50Hz

Color temperature: 3000K / 6000K

Clearance: 11000lm

HSCS:> 0.9

CRI:> 85

IP: 44

3 year warranty

Brand: Duhal

Power: 120W

Size ØxH (mm): 400 × 220

Voltage: 220V / 50Hz

Color temperature: 3000K / 6500K

Clearance: 12000lm

HSCS:> 0.9

CRI:> 85

IP: 44

Product characteristics:

Aluminum alloy shell, black powder coated thick leaf blades help speed up heat dissipation to increase LED chip life.

High power factor> = 0.96 to save energy.

Using CREE LED chips (USA): Laoij high-quality LED chip is the world's 1st class.

The wide voltage range of 100-270VAC prevents the lamp from unexpectedly drop in voltage, suitable for many places with different voltages.

The power adapter is separate from the heatsink compartment of the Led chip to avoid overheating to increase the life of the adapter.

Protection level: IP 65

Installation height: 150-200W (> = 8m)

Hight bay led SDRD100.

This series is a high-end model equipped with an oil cooler for high heat transfer coefficient; EMC anti-interference, overvoltage protection, anti-short circuit, withstand lightning propagation 6kV, operating voltage range from 110V to 260V, frequency 50Hz / 60Hz, so it is suitable for most factories with many devices. be.

• LED industrial DUHAL uses lighting to replace large-capacity lamps such as High Pressure Halogen, High Pressure Metal Halide, High Pressure Sodium ...
• - The lamp body is made of an anodized aluminum alloy, high thermal conductivity, advanced heat dissipation design, increasing the life of the lamp when operating for a long time while maintaining the quality of the lighting.
• - Illuminator is scientifically designed for concentrated light, increasing lighting efficiency.
• - DUHAL industrial LEDs save electricity, generate low heat and do not cause noise.
• - Turn on immediately without needing time to start as traditional high-pressure lamps.
• - Applications: lighting factories, factories, warehouses, competitions, ...

Hight bay led SDRD150W

This series is a high-end model equipped with an oil cooler for high heat transfer coefficient; EMC anti-interference, overvoltage protection, anti-short circuit, withstand lightning propagation 6kV, operating voltage range from 110V to 260V, frequency 50Hz / 60Hz, so it is suitable for most factories with many devices. be.

• LED industrial DUHAL uses lighting to replace large-capacity lamps such as High Pressure Halogen, High Pressure Metal Halide, High Pressure Sodium ...
• - The lamp body is made of an anodized aluminum alloy, high thermal conductivity, advanced heat dissipation design, increasing the life of the lamp when operating for a long time while maintaining the quality of the lighting.
• - Illuminator is scientifically designed for concentrated light, increasing lighting efficiency.
• - DUHAL industrial LEDs save electricity, generate low heat and do not cause noise.
• - Turn on immediately without needing time to start as traditional high-pressure lamps.
• - Applications: lighting factories, factories, warehouses, competitions, ...

Hight bay led SDRP

• LED industrial DUHAL uses lighting to replace large-capacity lamps such as High Pressure Halogen, High Pressure Metal Halide, High Pressure Sodium ...
• - The lamp body is made of an anodized aluminum alloy, high thermal conductivity, advanced heat dissipation design, increasing the life of the lamp when operating for a long time while maintaining the quality of the lighting.
• - Illuminator is scientifically designed for concentrated light, increasing lighting efficiency.
• - DUHAL industrial LEDs save electricity, generate low heat and do not cause noise.
• - Turn on immediately without needing time to start as traditional high-pressure lamps.
• - Applications: lighting factories, factories, warehouses, competitions, ...